目前顯示:產品資訊 / 特殊研究用儀器 / KITAZATO 顯微鏡用加溫冷卻板

    KITAZATO 顯微鏡用加溫冷卻板

高精度 Fuzzy Self Tuning PID 溫度控制 型錄下載

顯微鏡用透明加溫板(室溫 ~ 50℃)
顯微鏡用透明冷卻板(3℃ ~ 45℃)
顯微鏡用高溫型透明加熱版(室溫 ~ 110℃或450℃)

Standard Type

Noise Free Type

特點說明:
1.
PID控制玻璃片表面溫度均溫度佳
2.
完全符合各廠牌顯微鏡尺寸之加溫、加熱及冷卻板
3.
獨特之透明玻璃片,溫度傳導加熱或降溫效果佳
4.
高溫加熱板另提供RS232接收器供選擇
5.
另有防電磁波干擾型之加溫板供選擇
6.
適用之顯微鏡:OLYMPUS、NIKON、Leica、Carl Zeiss

Micro Warm Plate            JP Patent NO.2835422  US Patent NO.5717190、 NO.5973301

Provide an optimum and constant temperature on the glass plate for microscopic vital inspection of specimen. Transparent Warming Plate for microscopes (Room Temp. ~50°C)
Mircrowarm plate is a transparent glass heated by unique warming element in the glass, for microscopic inspection of specimen or operation under an optimum and constant temperature. The surface temperature of the glass is controllable uniformity by PID with fuzzy self-tuning controller.


Plate for General Purpose

MP-10DM (Standard Type)
DC-MP10DM (Noise Free Type)
  Compact size model, Fit on the most of upright & stereo microscopes stages. Can be used for Phase Contrast & Nomarski microscopes. Can be placed 90mm petri dish.
MP-10DMF.MP-1000 (Standard Type)
DC-MP10DMF DC-MP-1000 (Noise Free Type)
 

Compact & Flat type model. Fit on the most of upright & stereo microscopes stages. Easy to replace samples since the plate surface is flat.

MP-2000 (Standard Type)
DC-MP-2000 (Noise Free Type)
 

Middle size model. Just fit on the large-sized stage of stereo microscopes. Can be observed while keeping several petri dishes at constant temperatures.

MP-3000 (Standard Type)
DC-MP-3000 (Noise Free Type)
 

Large size model. Fit on the large-sized stage of stereo microscopes. Can also be used as a hot plate.


Plate for Inverted microscopes

MPF-10-(Standard Type)
DC-MPF-10- (Noise Free Type)
  Remove the stage ring and set the plate in the observation center hole of the stage. Easy to operate the micromanupilator and to replace samples since no obstacles on the stage.
MPF-10-O     for OLYMPUS IX 70 / 50、IMT2
MPF-10-N      for NIKON TE300 / 200、 TMD300
MPF-10-LR    for Leica DMIRB / E 3-plate mechanical stage
MPF-10HF- (Standard Type)
  Since equipped with 0.5mm thickness glass heater, possible to observe using high magnification lens. The best model for Hoffman Modulation Contrast Optics.
MPF-10-O         for OLYMPUS IX 70 / 50、IMT2
MPF-10HF-N      for NIKON TE300 / 200、 TMD300
MPF-10HF-LR    for Leica DMIRB / E 3-plate mechanical stage
MPF-10-LL (Standard Type)
DC-MPF-10-LL (Noise Free Type)
 

The model for Leica DMIRB 3-plate mechanical stage. The more wide range of view than MPF-10-LR. Easy to operate the micromanupilator and to replace samples since no obstacles on the stage.

MPF-10-LL (Standard Type)
DC-MPF-10-LL (Noise Free Type)
 

The model for Leica DMIRB 3-plate mechanical stage. The more wide range of view than MPF-10-LR. Easy to operate the micromanupilator and to replace samples since no obstacles on the stage.     ※600   The center hole on photo is optional


Plate for Stereoscopic microscopes

MPF-10-SZH (Standard Type)
 

The model for OLYMPUS SZH10.
The same shape as the stage of SZH10.

MPF-10-SZX (Standard Type)
DC-MPF-10-SZX (Noise Free Type)
 

The model for OLYMPUS SZX12 & SZX9.Can be fixed on the stage using the attached screws.

MPF-10-SMU (Standard Type)
DC-MPF-10-SMU (Noise Free Type)
 

The model for NIKON SMZ-U.

 

MPF-10-SMZ (Standard Type)
DC-MPF-10-SMZ (Noise Free Type)
 

The model for NIKON SMZ-2B / 2T 1/1B. Set the plate in the hole on the stage. Needs the optional spacer, if SMZ is not equipped with Diascopic Illuminator Base.

MPF-10-MZ (Standard Type)
 

The model for Leica MZ series.


Micro Cooling Plate

Transparent Cooling Plate for microscopes (3°C ~ 45°C)

Micro Cool Plate is a cooling plate for microscopic inspection of specimen or operation under an optimum and constant temperature in the range from ambient to 3°C. The cooling plate is cooled by a circulation of coolant which is cooled down at the chamber cooled by the thermoelectric device in the temperature control cooling unit. The surface temperature of the cooling plate is controllable uniformity (±0.3°C) 45°C are available as standard.

MD10 (45℃~3℃)  /  MC10 (ambient ~3℃)

MD10 (45°C ~ 3°C) / MC10 (ambient ~ 3°C)

  MD10 and MC10 are available in three types of plates. These plates are prevented to collect moisture by the optional defroster (frost free device).

F type

 
  For both upright and stereo microscopes
MD-10F compatible type
MC-10F cooling type
  Transparent cooling area.

R Type
 
  For inverted microscopes
MD-10R compatible type
MC-10R cooling type
  Can be fit in inverted stages of both OLYMPUS & NIKON

RF Type
 

  For inverted microscopes
MD-10RF-0 compatible type
MC-10RF-0 cooling type
 

Flat on the stages.(except –z)
Available for inverted stages of OLYMPUS, NIKON, and Leica, Carl Zeiss
-0  -O: OLYMPUS: IX 70 /50  IMT2
-N: NIKON: TE300 /200  TMD300
-LR: Leica: DMIRB (3-plate mechanical plate)
-Z: Carl Zeiss Axiovert

Leica DMIRB (Mechanical stage)


Micro Heat Plate

High Temperature Transparent Heating Plate for microscopes  110°C type/ 200°C type/ 450°C type
Microheat plate is a transparent heating plate for microscopic inspection under high temperature the range from ambient upto

110°C or 200°C. The heating area is a transparent heat resisting glass heated by unique heating element in the glass. Programmable Temperature Control Unit is available as standard. This is suitable for an observation of a transformation by heat such as liquid crystal, medicines, cosmetics, polymer, food stuffs etc. at an interested heating speed.

Plate for Inverted Microscopes

MP-10DMFH (compact size)
MP-2000H (middle size)
MP-3000H (large size)
MPF-10H
 

Equipped a transparent heat resisting glass heater. Available in six size of plates, and also nonprogrammable temp. control unit. Can also be provided with the terminal for RS232 Communication as optional.

※ The models with the programmable control unit are maked –PG at the end of model numbe

MP-200MSH
 

Equipped a transparent heat resisting glass heater. Wide heating area and range of view(50x500mm).
Can be heated up at an interested heating speed by the programmable temp. unit.

For both upright and stereo microscopes with the lens of which working distance is 4.5mm or more. Provided with the protective glass for lens from heat. Can also be provided with the terminal for RS232 Communication as optional.

MP-450DMSH
 

Customized model. Equipped the metallic heating block with built-in ceramic heaters. Wide heating area. (standard size: 30x35mm).
Can be heated up at an interested heating speed by the programmable temp. unit.

For both upright and stereo microscopes with the lens of which working distance is 4.5mm or more. Provided with the protective glass for lens from heat. Can also be provided with the terminal for RS232 Communication on your request.